Resetting the Power Folding Mirrors
Reset the power folding mirrors if:
- The mirrors are accidentally obstructed while folding.
- They are accidentally manually folded/unfolded.
- The mirrors will not stay in the unfolded position.
- The mirrors vibrate at normal driving speeds.
Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position. A popping noise may be heard during the resetting of the power folding mirrors. This sound is normal after a manual folding operation.
See Power Mirrors .
See also:
Interior
Like the previous Seville, five occupants fit inside the STS, which has soft
all-leather seats. Heated and ventilated seating is an option. The headliner and
pillars are covered in woven fabric. G ...
Back-Up Lamps
To replace this bulb:
1. Open the liftgate. See Liftgate for more information.
2. Remove the two screws from the taillamp assembly.
3. Pull the taillamp assembly rearward until the ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The heigh ...