Setting Cruise Control
If the cruise button is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used.
The cruise control light on the instrument panel cluster comes on after the cruise control has been set to the desired speed.
1. Press the button.
2. Get up to the desired speed.
3. Press the SET− button located on the steering wheel and release it.
4. Take your foot off the accelerator.
See also:
Wiper Blade Replacement
Windshield wiper blades should be
inspected for wear or cracking.
See Maintenance Schedule.
It is a good idea to clean or replace
the wiper blade assembly on a
regular basis or when worn.
For ...
Volume Control
VOL/ (Volume/Power): Turn
clockwise or counterclockwise to
increase or decrease the volume. ...
Anti-theft Alarm System Messages
SERVICE THEFT DETERRENT
SYSTEM
This message displays when there
is a problem with the theft-deterrent
system programmed in the key.
A fault has been detected in the
system which means that t ...