Tow/Haul Mode

Pressing this button at the end of the shift lever turns on and off the tow/haul

Pressing this button at the end of the shift lever turns on and off the tow/haul mode.

This indicator light on the instrument panel cluster comes on when the tow/haul

This indicator light on the instrument panel cluster comes on when the tow/haul mode is on.

Tow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. See Tow/Haul Mode   for more information.

Tow/Haul is designed to be most effective when the vehicle and trailer combined weight is at least 75 percent of the vehicle's Gross Combined Weight Rating (GCWR). See “Weight of the Trailer” in Trailer Towing  . Tow/Haul is most useful under the following driving conditions:

  • When pulling a heavy trailer or a large or heavy load through rolling terrain.
  • When pulling a heavy trailer or a large or heavy load in stop and go traffic.
  • When pulling a heavy trailer or a large or heavy load in busy parking lots where improved low speed control of the vehicle is desired.

Operating the vehicle in Tow/Haul when lightly loaded or with no trailer at all will not cause damage. However, there is no benefit to the selection of Tow/Haul when the vehicle is unloaded. Such a selection when unloaded may result in unpleasant engine and transmission driving characteristics and reduced fuel economy. Tow/ Haul is recommended only when pulling a heavy trailer or a large or heavy load.

    See also:

    Driver Information Center (DIC)
    The DIC display is located at the bottom of the instrument panel cluster. It shows the status of many vehicle systems and enables access to the personalization menu. The DIC buttons are located ...

    Call Waiting
    Call waiting must be supported on the cell phone and enabled by the wireless service carrier. - Press to answer an incoming call when another call is active. The original call is placed on ...

    Vehicle Messages
    Messages displayed on the DIC indicate the status of the vehicle or some action may be needed to correct a condition. Multiple messages may appear one after another. The messages that do not requir ...