Wood Panels
Use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
See also:
Cruise Control
CTS Shown, CTS–V Similar
The cruise control buttons are
located on the left side of the
steering wheel.
: Press to turn the system on or
off. The indicator light on the button
turns on wh ...
Using the Uplevel RSE On-Screen Display (OSD) Menus
Use the OSD setup display menus for:
. General Setup
. Audio Setup
. Quality Setup
. Preference Setup
To use the OSD menus while using the DVD player or an auxiliary device:
1. Press the SETUP b ...
If No Steam Is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or
heard, the problem may not be too serious. Sometimes the engine can get a
little too hot when the vehicle:
- Climbs a long h ...