Recording from MP3/WMA Discs or USB Storage Devices
USB Host Support
The USB connector uses the USB standards, 1.1 and 2.0.
USB—Supported Devices
- USB Flash Drives
- Portable USB Hard Drives
Recording to MEM
Press
REC, then select “Record Current Song” or “Record All Songs on Disc.”
The information stored by MEM is titled according to the ID3 tag associated
with it.
Re-recording a Previously Recorded Disc
If the disc or track has already been recorded to MEM, the message “The Song(s) is Already Recorded” displays.
Stopping the Recording
Press the REC button while recording from an MP3/WMA" width=15 height=15 id="_x0000_i1482"
src="images/books/1183/4/index.17.gif" border=0>REC button while recording from an MP3/WMA
CD or USB storage device to display the stop recording option. Select “Stop Recording
Song to MEM”
See also:
Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information regarding Part 15 of the
Federal Communications Commission (FCC) rules and Industry Canada Standards
RSS-GEN/210/220/310.
If there is a decrease in t ...
StabiliTrak® System
StabiliTrak assists with directional
control of the vehicle in difficult
driving conditions. The system turns
on automatically every time the
vehicle is started.
- To turn off both traction
...
Bluetooth Controls
Use the buttons located on the infotainment system and the steering wheel to
operate the Bluetooth system.
Steering Wheel Controls
(Push To Talk): Press to answer incoming calls, confirm system ...






