StabiliTrak® System
The vehicle has a traction control system that limits wheel spin and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.
- To turn off traction control, press and release g on the instrument panel. The appropriate DIC message displays. See Ride Control System Messages .
- To turn off both traction control and StabiliTrak, press and hold g until g illuminates and the appropriate DIC message displays. See Ride Control System Messages .
- Press and release g again to turn on both systems. For more information, see StabiliTrak® System .
See also:
Fuses and Circuit
Breakers
The wiring circuits in the vehicle are
protected from short circuits by a
combination of fuses and circuit
breakers. This greatly reduces the
chance of damage caused by
electrical problems.
...
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor): Seating positions with top tether anchors.
(Lower Anchor): Seating positions with two lower anchors.
To assist you in locating the lower anchors, each s ...
Setting the Power Liftgate 3/4 Mode
To change the liftgate stop position.
1. Turn the liftgate switch to either the MAX, or the 3/4 mode position and
power open the liftgate.
2. Stop the liftgate movement at the desired height by p ...