Lower Anchors and Tethers for Children (LATCH System)
The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Make sure that a LATCH-compatible child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual.
When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be attached using only the top tether and anchor.
In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. The child restraint manufacturer will provide you with instructions on how to use the child restraint and its attachments. The following explains how to attach a child restraint with these attachments in your vehicle.
Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments.
See also:
Manual Mode
Driver Shift Control (DSC) or
Tap Shift
Notice: Driving with the engine
at a high rpm without upshifting
while using Driver Shift Control
(DSC), could damage the vehicle.
Always upshift when ...
Older Children
Older children who have outgrown booster seats should wear the vehicle
safety belts.
The manufacturer's instructions that come with the booster seat state the
weight and height limitations fo ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, turn the mode switch to the OFF
position.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and close ...