Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post (striker). The tire and loading information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds.
The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires and Tire Pressure .
See also:
Safety
Six standard airbags include side-impact, side curtain-type and a new
dual-depth front passenger unit that deploys either shallow or deep depending on
crash severity, seat belt usage and occupant ...
Fog Lamps
To replace a front fog lamp bulb:
1. Pull out the push-pins located on
the underside of the protection
shield to remove the shield.
2. Reach up behind the front
bumper area from under the
...
Pulling a Trailer
Here are some important points:
- There are many laws, including
speed limit restrictions that apply
to trailering. Check for legal
requirements with state or
provincial police.
- Do not tow ...