See also:

Fog Lamps
To replace a front fog lamp bulb: 1. Pull out the push-pins located on the underside of the protection shield to remove the shield. 2. Reach up behind the front bumper area from under the ...

Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt s ...

Viscosity Grade
SAE 5W–30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W–30, 10W–40, or 20W–50. If in an area of extreme cold, where the temperature falls ...