Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks.
7. Stop and have someone pick up and store the chocks.
See also:
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Operating UHP Using Voice Control
The voice control of the UHP system enables you to operate several functions
of the mobile phone using your voice. The UHP system uses voice commands to
control the system and dial phone numbers. Af ...
Automatic Transmission Shift Lock Control Function Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the
vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room aro ...