Checking Engine Oil

It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview   for the location of the engine oil dipstick.

Obtaining an accurate oil level reading is essential:

1. If the engine has been running recently, turn off the engine and allow several minutes for the oil to drain back into the oil pan. Checking the oil level too soon after engine shutoff will not provide an accurate oil level reading.

2. Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way. Remove it again, keeping the tip down, and check the level.

    See also:

    Traction Control System (TCS)
    The traction control system limits wheel spin. The system is on when the vehicle is started. - To turn off traction control, press and release located on the console.   illuminates and the a ...

    What to Use
    Refer to Recommended Fluids and Lubricants   to determine what kind of lubricant to use. ...

    USB Port
    The USB connector uses the USB standards, 1.1 and 2.0. USB Supported Devices - USB Flash Drives - Portable USB Hard Drives - Fifth generation or later iPods* - First, Second, or Third generatio ...