When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section for an explanation of what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications .
Notice: Do not add too much oil. Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine. If you find that you have an oil level above the operating range, i.e., the engine has so much oil that the oil level gets above the cross-hatched area that shows the proper operating range, the engine could be damaged. You should drain out the excess oil or limit driving of the vehicle and seek a service professional to remove the excess amount of oil.
See Engine Compartment Overview for the location of the engine oil fill cap.
Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back in when through.
See also:
How to Check Power Steering Fluid
Notice: Extremely small amounts of contamination can cause steering system damage
and cause it to not work properly. Do not allow contaminants to contact the fluid
side of the reservoir cap/ dipst ...
Collision Damage Repair
(U.S. and Canada)
If the vehicle is involved in a
collision and it is damaged,
have the damage repaired by a
qualified technician using the proper
equipment and quality replacement
parts. Poorly performed col ...
Driving for Better Fuel Economy
Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible.
- Avoid fast starts and accelerate
smoothly.
- Brake gradually and avoid
abrupt st ...