Increasing Speed While Using Cruise Control
If the cruise control system is already activated:
- Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.
- To increase vehicle speed in small amounts, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.
See also:
Park Brake and P (Park)
Mechanism Check
WARNING!
When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case ...
Traction – AA, A, B, C
The traction grades, from
highest to lowest, are AA, A,
B, and C. Those grades
represent the tire's ability to
stop on wet pavement as
measured under controlled
conditions on specified
g ...
Fuses and Circuit Breakers
If the vehicle is a hybrid, see the hybrid supplement for more information.
The wiring circuits in the vehicle are protected from short circuits by a combination
of fuses, circuit breakers and fusi ...