Gasoline Specifications (U.S. and Canada Only)
At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB–3.5 or 3.511 in Canada.
Some gasolines contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT).
We recommend against the use of gasolines containing MMT.
See Fuel Additives for additional information.
See also:
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order
to get an accurate reading, the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See En ...
Vehicle Overview
Cadillac stepped into rear-wheel-drive territory with its STS sedan, which
replaced the front-wheel-drive Seville for 2005. Built on a Sigma-based
architecture, like the company's smaller CTS seda ...
Fast facts
1. Base 2.5L 4-cylinder models make 202 hp and 191 lb-ft of torque, with the
2.0T rated at 272 hp and 260 lb-ft and the 3.6L V6 at 321-hp and 275 lb-ft.
2. 0-60 times for each motor list at: 7.5, ...