Exiting the Feature Settings Menu
The feature settings menu will be exited when any of the following occurs:
- The vehicle is no longer in ON/RUN.
- The trip/fuel or vehicle information DIC buttons are pressed.
- The end of the feature settings menu is reached and exited.
- A 40-second time period has elapsed with no selection made.
See also:
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until
two beeps sound.
3 ...
Exterior
The 2007 Escalade EXT is roughly the same size as its predecessor, losing 1.5
inches of height but gaining an inch of length. Cargo room is up, with a rear
cargo bed that has 45.5 cubic feet of vo ...






